Hotsync Manager Does Not Start; Of Your Computer); When You Perform The Hotsync ® Operation, The E-Mail; Software Of Your Computer Starts - Sony CLIE PEG-SJ22 Troubleshooting Manual

HotSync Manager does not start (The HotSync
not displayed in the Windows task tray on the desktop
screen of your computer)
B Re-install the Palm™ Desktop for CLIÉ software.
When you perform the HotSync

software of your computer starts

B The e-mail software that you do not usually use or the e-mail software that
is not installed in your computer is selected in Mail Setup.
Click the HotSync
of your computer, then select Custom, Mail from the conduit list and
Change. Select the e-mail software that you usually use in the Mail
Setup window.
B The settings of the e-mail software are not complete.
Make sure that you set up the e-mail software of your computer.
You cannot perform the HotSync
Verifying your CLIÉ handheld
B Verify that the phone number you are connecting to is correct.
B If you have the call waiting service on your telephone line, tap the Phone
box in the Network Preferences screen from Preferences. Then
select the Disable call waiting check box in the Phone Setup screen
and enter the correct number.
B When you need to call an outside line, select the Dial prefix check box in
the Phone Setup screen and enter the correct number.
B Check whether you hear any noise coming from your service line. The line
may get cut, due to such noise.
20
®
icon in the Windows task tray on the desktop screen
®
operation, the e-mail
operation via a modem
icon is