Install Blower Pipes - Echo PB-7910T Operator's Manual

ASSEMBLY
PB-7910T
Never perform maintenance or assembly procedures with
engine running or serious personal injury may result.

Install Blower Pipes

1. Assemble clamps (A) and (G)
onto both ends of flexible pipe
(B).
Note: Clamp with cable guide
loop (G) fits elbow end of
flexible pipe.
2. Insert anti-static wire through
flex tube.
Note: A light lubricant may be
used to ease assembly of
flexible pipe to blower
elbow.
3. Assemble flexible pipe to elbow
(D) on blower. Position clamp
with cable guide loop (G) on
outside of flexible pipe and
tighten clamp.
Note: Hang handle freely from
blower to assure throttle
cable is not twisted
before installing handle
(E).
22
PB-7910 H/T
G
B
D
G
© 10/23 ECHO Incorporated
A
C
X7501201800