ProKlima FN-114501.4 Instruction Manual page 11

PARTS DESCRIPTION
1. Fan head
2. Locking knob
3. Knob for adjusting tilt of fan head
4. Screw for fixing tilt of fan head
5. Height adjustment pipe
6. Height adjustment knob
7. Speed control switch
8. Oscillation knob
9. Standing shaft
10. Standing base
11. Washer
12. Base locking screw
ASSEMBLING INSTRUCTIONS
1. Screw off the washer (11) and base locking screw (12) from the standing shaft (9). Attach the standing shaft
onto the standing base (10). Place the washer and base locking screw. Rotate the base locking screw to fix
the standing shaft firmly.
2. Loosen the height adjustment knob (6) and pull out the height adjustment pipe (5). Tighten the height
adjustment knob.
3. Loosen the locking knob (2) on the bottom of the fan head (1). Align and place the fan head onto the top of
the height adjustment pipe. Tighten the locking knob to fix the fan head on the top.
- 10 - FN-114501.4 / FN-114501.7