Table of Contents
Advertisement
• This feature will restore your computer to the Windows operating system preinstalled at the factory. Do
not use this feature if a customized operating system is installed on your computer, otherwise the
customized functions or applications cannot be restored.
• This feature only works with wired network (connected via the Ethernet connector on your computer) and
wireless network (WPA2 personal only).
Do the following to restore the Windows operating system:
1. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
2. Select Config ➙ Reinstall Windows from Cloud. Follow the on-screen instructions to enable this
feature.
3. Press F10 to save changes and exit.
4. The computer will restart automatically. When the logo screen is displayed, press F12.
5. Select App Menu ➙ Reinstall Windows from Cloud, and then follow the on-screen instructions.
If the recovery process fails, you still have other options to restore the Windows operating system. For more
information, refer to "Self-help resources" on page 57.
RAID
Redundant Array of Independent Disks (RAID) is a technology that provides increased storage functions and
reliability through redundancy. It also can improve data storage reliability and fault tolerance compared with
single-drive storage systems. Data loss resulting from a drive failure can be prevented by reconstructing
missing data from the remaining drives.
When a group of independent physical storage drives is set up to use RAID technology, they are in a RAID
array. This array distributes data across multiple storage drives, but the array appears to the host computer
as one single storage unit. Creating and using RAID arrays provides high performance, such as the expedited
I/O performance, because several drives can be accessed simultaneously.
Storage drive requirements for RAID levels
Your computer supports M.2 NVMe (PCIe) solid-state drive.
Note: Ensure that your computer has two identical storage drives installed (two M.2 NVMe solid-state drives
with the same capacity) for supported RAID levels. If only one drive is installed, or two different types of
drives are installed, the following information does not apply.
Your computer supports the following RAID levels:
• RAID 0: striped disk array (missing data resulting from a drive failure cannot be reconstructed)
– Consist of two identical storage drives
– Supported strip size: 4 KB, 8 KB, 16 KB, 32 KB, 64 KB, or 128 KB
– Better performance without fault tolerance
– Higher risk of data loss resulting from a member drive failure compared with non-RAID configuration
• RAID 1: mirrored disk array
– Consist of two identical storage drives
– Improved reading performance and 100% redundancy
Enter the Intel RST configuration utility
1. Ensure that RAID is enabled in the UEFI BIOS menu:
.
Chapter 5
Configure advanced settings
39
Advertisement
Table of Contents
