Table Of Contents; Conformity Certificates; Introduction - Husqvarna Z454X Operator's Manual

Conformity certificates.................................................. 10
Introduction................................................................... 10
Safety............................................................................12
Operation...................................................................... 17
Maintenance................................................................. 20
Troubleshooting............................................................ 26
USA requirements
Labels are placed on the engine and/or in the engine
compartment stating that the machine will fulfill the
requirements. Do not remove these labels. Certificates
can also be supplied with the machine at delivery or
Pre-delivery inspection and product
numbers
A pre-delivery inspection has been done of this product.
Make sure that you receive a signed copy of the pre-
delivery inspection document from your dealer.
Service agent contact information:
This operator's manual is for product with product number / serial number:
Engine:
Transmission:
The product numbers are found on the type plate. Refer
Product overview on page 10 for the location of the
to
type plate.
Product description
This product is a ride-on lawn mower. The control levers
let the operator steer the product and adjust the speed
Product overview
(Fig. 1)
1. Control levers
2. Parking brake
3. Tracking control
4. Hour meter
5. Fuel shut-off valve
6. Hydraulic release lever
7. Fuses
8. Fuel tank cap
10
Contents
Transportation, storage and disposal........................... 29
Technical data.............................................................. 30
Service..........................................................................32
EU declaration of conformity.........................................33
UK Declaration of conformity ....................................... 34

Conformity certificates

written in the Engine manual. Take care of them as they
are valuable documents.
To implement improvements, specifications and designs
can be altered without prior notification.

Introduction

/
of the product. An hour meter shows how many hours
the product has been used.
Intended use
The product is made to cut grass on open and level
ground only. Do not use the product for other tasks.
9. Choke control
10. Ignition switch
11. Throttle control
12. PTO button
13. Fuel gauge
14. Seat adjustment lever
15. Deck lifting lever
16. Type plate
17. ROPS
1741 - 002 - 22.08.2023