Home Theater Ir System - Mitsubishi Platinum Series Owner's Manual

Remote Control Functions: Active A/V Network
When the slide switch is set to VCR, press-
ing MENU on the TV remote control will:
Turn the TV on and select input-1.
Turn the VCR on and display the VCR
menu.
When using the Active A/V Network,
always point the remote control towards
the TV.
If you are using the Active A/V Network
with the Home theater IR System, turn
the TV and A/V receiver on before press-
ing PLAY on the TV remote control.
Remote Control Functions: Home Theater IR System
The Mitsubishi Home Theater IR System
Control is a special feature that makes it
easier to use your TV with a Mitsubishi digi-
tal A/V receiver. Once your equipment is
properly connected and set up, your TV and
Mitsubishi digital A/V receiver will change
inputs together, to match high resolution
pictures with the proper surround sound.
See How Connections Affect the Home The-
ater IR System, Pages 14-15, for installation
instructions.
When you change inputs on your TV to
watch different video products, your TV will
send signals via the infrared emitter to your
Mitsubishi digital A/V receiver and will also
change inputs to hear the sound from that
product. You will automatically hear the high
quality digital surround sound from digital
products like your DTV receiver and DVD,
and high quality analog stereo or surround
sound from non-digital products like your
VCR.
Operation with Your DVD Player
(when slide switch is set to DVD)
Your remote control also offers you conve-
nience when used with a Mitsubishi DVD
player. Pressing PLAY on the TV remote
control will:
Turn the TV on and select Component-1.
Turn the DVD player on and play a
disc (if a disc is properly loaded and the
DVD player is within the remote control's
range).
When you turn on your TV and select Ant-A
or Ant-B, the A/V receiver automatically
turns on (this can take up to 15 seconds).
If you select Ant-A or Ant-B and turn the
TV off, the A/V receiver will automatically
turn off in five minutes. As you change TV
inputs, the A/V receiver changes its source
for sound.
When using the Home Theater IR
System, point the TV remote towards
the A/V receiver to adjust volume.
Part IV: Operation
57
57