Table Of Contents; Safety Instructions; Safety Notes - Phoenix Mecano Rose EJB Series Instruction Manual

Contents
1.0 Safety Instructions ..........................................................................................................................2
1.1 Safety Notes....................................................................................................................................2
1.2 Modification and alteration............................................................................................................3
2.0 Standards conformity ........................................................................................................................3
3.0 Function ..........................................................................................................................................3
4.0 Technical Data.................................................................................................................................4
5.0 Installation.......................................................................................................................................6
5.1 Dimensional drawings.....................................................................................................................6
5.2 Installation Conditions...................................................................................................................10
5.3 Mounting & operating positions....................................................................................................10
5.4 Electrical Connection.....................................................................................................................11
6.0 Commissioning ..............................................................................................................................12
7.0 Inspection, Maintenance, Overhaul and Repair.............................................................................12
7.1 Inspection and Maintenance .........................................................................................................12
7.2 Repair and Overhaul ......................................................................................................................12
8.0 Specific condition of use ................................................................................................................12
9.0 Technical Support.......................................................................................................................................12
1.0

Safety Instructions

1.1

Safety notes

The target group of these instructions is electrical operatives and instructed staff
following EN/IEC 60079-14.
 Operating permit expires in event of non-compliance.
Use the devices only for their intended purpose!
Serious risk of injury!
The explosion group, temperature class and ambient temperature marked on the
enclosure must be observed!
Any unauthorized work on the device is prohibited!
Repairs affecting the explosion protection must only be carried out by ROSE or a
qualified authorized person in accordance with EN/IEC 60079-19!
Do not allow combustible dust deposit to form on enclosure!
IM.EJB.X.01.2019
 We cannot be held liable for damage caused by incorrect or unauthorized
use or by non-compliance with these operating instructions.
 Use the device only if it is undamaged.
 Only original parts supplied by ROSE are permissible for spares and repair
work. Other spare parts can invalidate explosion protection.
 Please look at marking on enclosure, it should be installed in zone, explosion
group, T Class & ambient temperature for which they are suitable.
 We cannot be held liable for damage caused by incorrect selection.
 Installation, maintenance, overhaul and repair may only be carried out by
appropriately authorized and trained personnel.
 Regular cleaning of dust deposit is recommended to avoid hot surface
becoming ignition risk.
IECEx/ATEX Page 2