User manual 1 Safety Precautions • Only use detergent intended for water-wash of textiles. Never use dry cleaning agents. • The machine shall be connected with new water hoses. Re-used water hoses must not be used. • The machine's door lock must under no circumstances be bypassed. •...
User manual supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. • Additional requirements for other countries: –...
— different segments use different programs. The following program description is a short description of some exam- ples of programs that can be used. For a complete and detailed information about all the available wash programs, please refer to Wascomat web-site. It is recommended to follow the care labelling of the garment as far as possible.
Page 8
User manual The following table shows some examples of available programs used on coin operated machines and a short de- scription of those: Program Description Cotton and terry. COLD 40°C. For an optimal result, full load is recommended. WARM Cotton and terry. 60°C.
User manual 3 Handling 3.1 Load Load the goods into the machine according to recommendations and close the door. The maximum load is 6 kg. 3.2 Detergent Add the correct amount of detergent and softener according to recommendations. (Not valid if automatic detergent dosing is used). fig.X00963 Softener, liquid.
User manual 3.3.1 General, OPL Select program by turning the control knob. Example of programs NORMAL Different temperatures can be selected. 30°C - 95°C. MILD Different temperatures can be selected. 40°C - 60°C. Start the machine by pressing the control knob. The machine will start by weighing the load with an extraction.
User manual 3.4 Additional functions There is a menu with additional functions available for selection after start. When pressing the control knob / start but- ton (on machines without control knob) the menu will appear on the display. Select from the menu by turning the control knob / pressing the temperature button/-s and press the control knob / start button to activate.
User manual Auto restarts Select AUTO RESTARTS and activate. Set the number of automatic restarts that the machine will perform of the selected program. Press the control knob / start button to confirm the settings. 3.5 When program has ended Leave the door open when ready and do not close the detergent container all the way in (it shall be a bit open).
User manual 4 Timer The timer is used to start a part of the program (for example the last rinse of the udder cloth program) after pause on a pre-set time. The time can be set for all days or for selected days. To program the timer you need to activate the machines service mode.
User manual 5 Error codes A fault in the program or in the machine is indicated by an error code on the display. Some of these error codes can be solved easily without contacting service personnel. Error Text Cause/Action code 11:1 NO WATER Water level acknowledgement not reached in time.
User manual 6.3 Every day Check that the door is locked during a program. Make sure the door cannot be opened until after the program is complete. If the door can be opened before program end, the machine must be placed out of order until repairs are made. Check that the door does not leak.
User manual 6.4.1 Deliming When deliming is needed: Use the special machine cleaning program. If it is not available, contact authorized service personnel to get access to the program. It is also possible to use a program with high temperature, 95°C, for deliming. Add a deliming agent, for example citric acid.
Page 17
User manual When remounting, place the cut on the filter part downwards when inserting it. Make sure the connections are tight. At regular basis, check the drain connection, joints in the drain pipe etc and remove any lint and dust. Clean with for example a small brush.
User manual 6.6 Water inlet At regular basis, check the filter at the water inlet. Clean if necessary. Demount the hose to the water inlet and pull out the filter (A). When remounting, make sure the filter is in position and that the connections are tight. 6.7 Maintenance to be carried out by qualified service personnel Contact qualified service personnel to perform the following maintenance: Once a year:...
User manual 7.2 Disposal of packing The packing must be disposed of in compliance with the current regulations in the country where the appliance is used. All the packing materials are environmentally friendly. They can be safely kept, recycled or burned in an appropriate waste incineration plant. Recyclable plastic parts are marked as following examples.
Page 20
Electrolux Professional AB 341 80 Ljungby, Sweden Share more of our thinking at www.wascomat.com...