Operating Remote Control - Napoleon Element NEFB36H-BS-1 Installation And Operation Manual

5.2

operating remote control

Power
Timer
Temperature
Control
Flame
Top
Light
Brightness
Heater
Flame Speed
note:
When operating the remote control, it must be directed towards the front centre of the appliance.
Turns the appliance on / off.
Turns the timer on /off.
10 Settings: -- (no setting), 30 min., 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h
Controls the appliance temperature.
11 Settings:
°C 18 19 20 21 22 23
°F 64 66 68 70 72 74
NOTE: When setting is °C or °F, the temperature control is OFF.
Holding the button for 5s will switch the temperature from °C to °F
and vice versa.
Controls the flame brightness.
5 Settings:
F0 - Flame off
F1 - Small flame
F2 - Medium flame
F3 - Bright flame
F4 - Brightest flame
Controls the top light colour.
8 Settings:
d1 - Yellow, red, and blue
d2 - Red and blue
d3 - Yellow and blue
d4 - Yellow and red
d5 - Blue
d6 - Red
d7 - Yellow
d0 - Off
Controls the ember bed brightness.
6 Settings:
b0 - No brightness
b1 - Low
b2 - Medium
b3 - Bright
b4 - Brightest
b5 - Pulsing effect (fade in and out)
Turns the heater and blower on / off.
3 Settings:
H0 - Heater and blower off
bL - Blower on
H1 - Heater on
NOTE: Heater function can be disabled / enabled by holding the
button for 5s. When the heater function is disabled, "LO" will be
displayed.
Controls flame speed.
5 Settings:
S-3, S-4, S-5, S-1, S-2
operating instructions
24 25 26 27
76 78 80 82
EN
21
W415-3155 / B / 07.06.23