Table of Contents
Advertisement
Recording a greeting
If you do not wish to use the prerecorded greeting,
you can record your own greeting.
1 Press
flash/program
with the receiver placed on the base
phone.
A voice guide is heard.
2 Pick up the receiver and after you hear a
beep, speak in to the microphone.
3 Press
flash/program
the receiver to the base phone.
The recorded greeting is played back after a beep.
To play back the recorded greeting
Press
to turn on the answering machine.
message
To erase the recorded greeting
1 Press
while the greeting is played back.
erase
2 Press
again.
erase
You will hear a confirmation beep.
Selecting the greeting
You can select either the prerecorded greeting or
your own greeting.
1 Press
flash/program
continuously with the receiver placed on
the base phone.
A voice guide is heard.
2 Press one of the following buttons to
select the desired greeting.
:to play back the prerecorded message
0
:to play back your own greeting
1
:to play back your own greeting only when a
2
call is from a number stored for speed
dialing or in the phone directory
3 Press
flash/program
You will hear a confirmation beep.
Notes
• If you have not recorded your own greeting, the
prerecorded greeting will be heard.
• Even if "0" is selected in step 2, "1" will be selected
automatically when you record your own greeting.
Changing the number of rings
The answering machine is factory-set so that it
answers a call after about 5 rings when there is no
message and about 2 rings when messages have been
recorded.
You can select the number of rings between 2 to 9.
and
continuously
6
or
, or return
play/stop
,
and
4
.
1 Press
flash/program
continuously with the receiver in place
on the base phone.
A voice guide is heard.
2 Press a button among
3 Press
flash/program
A beep is heard and the number selected is
announced.
To resume the factory setting
Press
in step 2.
0
Erasing messages
The total recording time of this answering machine is
approximately 10 minutes including the greeting and
messages or up to 20 messages. When no more
recordings can be made, the memory is full. Erase
some of the messages.
You can erase all the messages at one time or erase
messages one by one.
Notes
• You cannot erase a message until you play it back once.
• You cannot erase messages from the handset.
Erasing all the messages at one time
1 Play back all messages.
2 Press
with the receiver on the base phone.
erase
3 Press
again.
erase
You will hear a confirmation beep.
Erasing messages one by one
1 Play back the message you wish to erase.
2 While the message is being played back, press
.
erase
3 Press
again.
erase
You will hear a confirmation beep and playback of
the next message begins.
To stop playback, press
,
and
1
to
.
2
9
.
.
play/stop
119
Advertisement
Chapters
Table of Contents
