Option Buttons; Cold Wash; Delay Wash; Turbo Wash - LG WT1901C Series Owner's Manual

OPTION BUTTONS

Your washing machine features several additional cycle
options that customize cycles to meet your individual
needs. To use these options, select the desired option
AFTER selecting the desired cycle.
After selecting the desired cycle and settings, press
the cycle option button(s) for the option(s) you would
like to add. The button will light when that option is
selected. If the selected option is not allowed for the
selected cycle, the chime will sound twice to alert you
and the LED will not illuminate.
NOTE:
y To protect your garments, not every option is
available with every cycle.
y If the START/PAUSE button is not pressed within 60
minutes to start the cycle, the control will shut off
and all settings will be lost.

COLD WASH

This option saves energy by using cold water while
increasing the wash and rinse times to maintain wash
performance.
NOTE:
y The Stain Care feature cannot be selected with the
Cold Wash option.
y Wash time will increase up to 50% with the Cold
Wash option.
y For best wash results, only wash small loads (less
than 8 lbs.) with the Cold Wash option.

DELAY WASH

Once you have selected the cycle and other settings,
press this button to delay the start of the wash cycle.
Each press of the button increases the delay time by 1
hour, for up to 19 hours. Once the desired delay time is
set, press the START/PAUSE button to start the delay
time.
NOTE: If the START/PAUSE button is not pressed to
begin the delay time, the washer will automatically
shut off after five minutes and all cycle settings will
be lost.

TURBO WASH™

Adding the Turbo Wash™ option reduces the cycle
time while still providing similar wash performance to
the same cycle without Turbo Wash.
NOTE:
y The Turbo Wash™ option cannot be used with all
cycles.
y Turbo Wash™ defaults ON for NORMAL, PRE
WASH + NORMAL, and SPEED WASH cycles.

EXTRA RINSE

This option will add an extra rinse to the selected cycle.
Use this option to help ensure the removal of detergent
or bleach residue from fabrics. Liquid fabric softener, if
used, is always dispensed in the final rinse.
NOTE: You cannot select the Extra Rinse option with
the Spin Only option and Tub Clean cycle.

WATER PLUS

Use this option to add extra water to the wash cycle for
better wash performance and stain treatment of large or
bulky items.
NOTE:
y If the washing machine reaches its maximum water
level, the WATER PLUS button will have no effect.
y The Water Plus option can only be selected or
deselected while the cycle is running.
y Once the Water Plus option has been added to a
cycle, it is saved as a default option on that cycle
until you deselect it.
y To deselect the option, press WATER PLUS after
starting the cycle.
Adding the Water Plus Option to a Cycle
1. While the cycle is running, press START/PAUSE to
pause the cycle
2. Press WATER PLUS to add Water Plus as a default
option for that cycle.
3. Press START/PAUSE to resume the cycle.

SIGNAL

The washing machine plays a melody when the wash
cycle has finished. Press and hold the EXTRA RINSE
button for three seconds to activate or deactivate
SIGNAL . When no signal is heard, the signal is off. The
volume settings are ON/OFF.

CONTROL LOCK

Use this option to disable the controls. This feature can
prevent children from changing cycles or operating the
machine. Once the CONTROL LOCK is set, it must be
deactivated before any controls, except the POWER
button, can be used. Once the washer has shut off,
the POWER button will allow the machine to be turned
ON, but the controls will still be locked. When the
controls are locked, CL will display alternately with the
estimated time remaining.
Press and hold the SOIL LEVEL button for 7 seconds to
activate or deactivate CONTROL LOCK.
NOTE: Once the controls are locked, they must be
manually unlocked to restore operation.
25
HOW TO USE