ZONGSHEN ZS125-86 Service Manual page 46

[2] If the front wheel is deformed due to vibration
or impact, or runs off tracking, or if the steering bar
jitters or shakes in the driving, it is necessary to
replace or adjust the wheel.
Check the
Caution
front wheel
The wheel needs to be replaced when the wheel
runs out beyond the limit for maintenance .
[3] Before the disassembly of the front wheel, the
motorcycle body must be firstly secured in the way
that hangs the front wheel off the ground, and then
Take down the
remove the fitting nuts on front axle and take out
front wheel
the front axle and take down front wheel assembly.
[4] Take out the front axle bushing and check it for
any abrasion. If the front wheel bushing is severely
worn, replace it.
Take out the bushing
Caution
The bushing should be greased when installed
[5] Take out the front axle oil seal and check it for
any abrasion on the edge. If the edge of front wheel
oil seal is severely worn, replace it.
Take out the oil seal
40