Table of Contents
Advertisement
THERMA V
Monobloc Type
3. Installation Space
3.1 General considerations
• If an awning is built over the unit to prevent direct
sunlight or rain exposure, make sure that heat radiation
from the condenser is not restricted.
• Ensure that the spaces indicated by arrows around
front, back and side of the unit.
• Do not place animals and plants in the path of the warm
or cold air.
• Take the unit weight into account and select a place
where noise and vibration are minimum.
• Select a place so that the air flow and noise from the
unit do not disturb neighbors.
• Place that can sufficiently endure the weight and
vibration of the outdoor unit and where even
installation is possible.
• Place that has no direct influence of snow or rain.
• Place with no danger of extreme snowfall or icicle drop.
• Place without weak floor or base such as decrepit part
of the building or with a lot of snow accumulation.
4
* Please secure the space, considering field installation of the
shut-off valve and strainer.
Design and installation
[Unit : mm]
Advertisement
Table of Contents
