Table of Contents
Advertisement
2-1 SUPER P6DNH/P6DNH2 System Components
The equipment listed in this section is required to build a high per-
formance system based on the SUPER P6DNH/P6DNH2 mother-
board.
The minimum configuration for a standard system is listed
below. To create the full enhanced configuration, add the enhanced
system configuration equipment listed on the next page to the
equipment listed below.
Standard System Configuration
• 300 watt (minimum) 5V power supply
• Chassis with a speaker connected to a 4-pin connector, a push
button switch with 2-pin connector for the reset function, and a
keylock connected to a 5-pin connector
• SUPER P6DNH/P6DNH2 system board
• AT-compatible keyboard (84 or 101 style keyboard)
• 8 MB or 16 MB of system memory
• One 1.2 MB 5.25" and/or one 1.44 MB 3.5" floppy disk drive
• Use PCI Fast SCSI card and hard disk drive or the on-board
IDE interface
• PCI VGA card
Chapter 2:
Chapter 2
Installation
2-1
Installation
Advertisement
Table of Contents
Troubleshooting
