Table of Contents
Advertisement
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
The following items appear only when the Resume On RTC Alarm item is set
to [Enabled].
RTC Alarm Date [15]
To set the alarm date, highlight this item and press the <+> or <-> key to make the
selection.
System Time [12:30:30]
Use the <ENTER>, <TAB> or <SHIFT-TAB> key to select a field. Use the <+> or <->
key to configure alarm time.
Power On By External Modems [Disabled]
[Disabled]
[Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first
try. Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.
Power On By PCI Devices [Disabled]
[Disabled]
[Enabled]
Power On By PCIE Devices [Disabled]
Allows you to enable or disable the PCIE devices to generate a wake event.
[Disabled]
[Enabled]
4-32
Disables to power up the computer when the external modem
receives a call while the computer is in Soft-off mode.
The computer could be powered up when the external modem
receives a call while the computer is in Soft-off mode.
Disables the PME to wake up from S5 by PCI devices.
Allows you to turn on the system through a PCI LAN or modem
card. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead.
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Chapter 4: BIOS setup
Advertisement
Table of Contents
