Table of Contents
Advertisement
3.
The following screen appears. Select a channel and press <Enter> to enter
the setup.
LSI Logic Config Utility
Adapter List
Adapter
SAS1068E
Esc = Exit Menu
Alt+N = Global Properties -/+ = Alter Boot Order
The numbers of the channel depend on the controller.
The Adapter Properties screen appears.
4.
Use the arrow keys to select RAID Properties, then press <Enter>.
LSI Logic Config Utility
Adapter Properties -- SAS1068E
Adapter
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address
NVDATA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu
Enter = Select Item -/+ = Change Item
5-16
v6.16.00.00 (2007.05.07)
Global Properties
PCI
PCI
PCI
PCI
FW Revision
BUS
Dev
Fnc
Slot
04
03
00
00
1.22.01.00-IR
F1/Shift+1 = Help
v6.16.00.00 (2007.05.07)
F1/Shift+1 = Help
Status
Boot
Order
Enabled
0
Ins/Del = Alter Boot List
SAS1068E
00
04:00:00
1.22.01.00-IR
500E0101:23456712
2B.00
Enabled
0
(Enabled BIOS & OS)
Chapter 5: RAID configuration
Advertisement
Table of Contents
