Table of Contents
Advertisement
4.4.4
The Record setting section contains parameters that allows you to
configure the recording duration whenever condition is detected. To set
the recording parameters, click the Record setting item from the setup
dialog box. The following submenu appears:
To set the recording parameters:
1.
Click to enable Start recording whenever there's an unusual condition
occurs.
2.
When enabled, key in or use the arrows to set the recording duration
in seconds. The default value is 2 seconds.
3.
Click OK to save settings and exit.
e3325_vga sw_0829.indb 49
Record setting
49
2007.8.29 11:34:14 AM
Hide quick links:
Advertisement
Table of Contents
