Autoboost Setting - Hitachi airPoint Room700 Operation Manual

5. Function Menu Screen Display

5.7 Autoboost Setting

The function is used to provide powerful cooling and heating for 30 minutes once the operation starts.
This function is only available when the operation mode is Cool or Heat.
Whenever the unit is turned on, the system operates in the Autoboost mode for 30 minutes.
NOTES:
•
The Autoboost function is available only on selected outdoor units. If the system does not support this
function, Autoboost cannot be set.
•
Autoboost cannot be used if Power Savings is not supported.
•
When this function is activated while mode is "Cool", fan speed changes and is locked in "Auto" fan speed
for approximately 30 minutes regardless of the current setting. While in this operation (fan speed "Auto"),
fan level may reduce when the room temperature gets close to the setting temperature. The operation starts
regardless of the fan speed.
1. Set the autoboost
Step1. Select "Autoboost" on the "Function Menu" screen and
press "OK".
Step2. Press " " or " " ， the selected items changes as follows:
"Not Set" ↔ "Cool" ↔ "Heat" ↔ "Cool + Heat".
Select the Autoboost mode and press "OK" to confirm the
settings.
Press " " to return to the "Function Menu" screen.
28
Function Menu
Power Consumption Display
Autoboost
Comfort Setting
Motion Sensor Setting
Setback Setting
OK Select
Autoboost
Not Set
Cool
Heat
Cool + Heat
Select
OK
A16381H9HL
(Mon) 16:30
Back
Back