Sharp XGNV5XB Quick Reference

Quick Reference for Notevision 5
1. Connecting an IBM or Compatible PC
1. Plug one end of the supplied computer cable into the blue
"COMPUTER INPUT" port on the projector.
2. Plug the other end of the supplied computer cable into the
"Monitor Output" port on the computer. (Also blue on many
PCs.)
1
2
Computer
cable
(supplied)
3. Plug the supplied power cord into the AC socket (1) on the
back of the projector and press the MAIN POWER switch (2).
1
4. Press the POWER ON button on the projector or on the "Power"
remote control.
5. Turn on the computer.
6. Press the AUTO SYNC button on the projector or on the
"Power" remote control to adjust the image.
2. Using the "Wireless" Mouse (PC or Macintosh)
• Make sure that your computer is turned off while making any mouse control
cable connections.
• When using the wireless mouse with an IBM or compatible PC, you can use
either a PS/2 or Serial cable connection. (See diagram below.)
• Use the supplied mouse control cable for Mac when using the remote mouse
receiver with a Macintosh computer.
Mouse control cable
for Mac (supplied)
Mouse control cable for IBM PS/2 (supplied)
XG-NV5XB/QR(E-1)
2
POWER ON ON VOL
MUTE
button
OFF
BLACK
SCREEN LASER
TOOLS MENU
R-CLICK ENTER
INPUT IrCOM
FREEZE AUTO SYNC
KEYSTONE ENLARGE
OFF
MOUSE ADJ.
BLACK
SCREEN LASER
MENU
TOOLS
LIGHT
LCD PROJECTOR
R-CLICK ENTER
INPUT IrCOM
AUTO SYNC
FREEZE AUTO SYNC
button
KEYSTONE ENLARGE
MOUSE ADJ.
Remote mouse receiver (supplied)
Use this terminal to connect the
supplied mouse control cable to
the remote mouse receiver.
Mouse control serial
cable (supplied)
LCD Projector
3. Connecting a Macintosh
Use the supplied Macintosh adaptor when using Macintosh
computers with your Sharp projector. This adaptor may not be
necessary with some Macintosh computers.
Macintosh adaptor (supplied)
1. Set the proper switches on the supplied Macintosh adaptor to
the desired resolution. (See back of adaptor for specific
resolutions.)
2. Connect the supplied Macintosh adaptor to one end of the
supplied computer cable.
3. Connect the other end of the Macintosh adaptor to the "Monitor
Output" port on your Macintosh computer.
4. Plug the other end of the supplied computer cable into the blue
"COMPUTER INPUT" port on the projector.
4
3
2
Computer
cable
(supplied)
5. Plug the supplied power cord into the AC socket (1) on the
back of the projector and press the MAIN POWER switch (2).
1
6. Press the POWER ON button on the projector or on the "Power"
remote control.
POWER ON
button
7. Turn on the computer.
8. Press the AUTO SYNC button on the projector or on the
"Power" remote control to adjust the image.
AUTO SYNC
button
ON
OFF
Macintosh
adaptor
(supplied)
2
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS MENU
R-CLICK ENTER
INPUT IrCOM
FREEZE AUTO SYNC
KEYSTONE ENLARGE
MOUSE ADJ.
BLACK
SCREEN LASER
TOOLS MENU
LIGHT
LCD PROJECTOR
R-CLICK ENTER
INPUT IrCOM
FREEZE AUTO SYNC
KEYSTONE ENLARGE
MOUSE ADJ.
LIGHT