Advertisement
Main Menu
Table of Contents
Maintenance Minder
To change the information display
from the engine oil life display to the
odometer, the trip meter or average
fuel economy, press and release the
select/reset knob.
When the engine oil life is 0 percent
or negative distance traveled, the
Maintenance Minder indicator (
remains on even if you change the
information display.
Immediately have the service
performed, and make sure to reset
the display as described.
250
TM
Maintenance Main Items and Sub
Items
MAINTENANCE MAIN ITEM
)
MAINTENANCE SUB ITEM(S)
All maintenance items displayed on
the information display are in code.
For an explanation of these
maintenance codes, see page 253.
Resetting the Engine Oil Life
Display
Your dealer will reset the display
after completing the required
maintenance service. You will see
''OIL LIFE 100%'' on the information
display the next time you turn the
ignition switch to the ON (II)
position.
If maintenance service is done by
someone other than your dealer,
reset the Maintenance Minder as
follows:
1. Turn the ignition switch to the ON
(II) position.
2. Press the select/reset knob
repeatedly until the engine oil life
is displayed.
Advertisement
