Siemens CB734G1 1 Series User Manual And Installation Instructions page 23

Table of Contents

Advertisement

Note: When sliding the pane in, ensure that the
5.
glossy side of the pane is on the outside and the
cut-outs on the left and right are at the top.
Slide the inner pane into the left- and right-hand
retainers  ​ ⁠ .
Push the inner pane upwards until it is in the left-
6.
and right-hand retainers  ​ ⁠ .
19  Rails
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
19.1 Detaching the rails
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
Lift the rail forwards slightly
1.
Pull the whole rail to the front
2.
Clean the rail.
3.
​ ⁠ and detach it
​ ⁠ .
​ ⁠ and remove it.
Put the door cover into position  ​ ⁠ and push down
7.
on it until you hear it click into place.
Open the appliance door fully.
8.
Close the locking levers on the left- and right-hand
9.
hinges  ​ ⁠ .
a The locking levers are closed. The appliance door is
secured and cannot be detached.
Close the appliance door.
10.
Note: Do not use the cooking compartment again until
the door panes have been correctly fitted.
19.2 Attaching the rails
Notes
¡ The rails only fit on the right or left.
¡ For both rails, ensure that the curved rods are at the
front.
First, push the rail into the middle of the rear
1.
socket  ​ ⁠ until the rail rests against the cooking
compartment wall, and then push this back
Push the rail into the front socket
2.
also rests against the cooking compartment wall,
and then press this downwards
Rails en
​ ⁠ .
​ ⁠ until the rail
​ ⁠ .
23

Advertisement

Table of Contents
loading

Table of Contents