Buydeem K2423 Electric Tea Maker with Infuser 1.2L

Understanding Product

Diagram of parts

Congratulations on your BUY DEEM Tea Maker!
We know taste matters. For us, bringing a rich steeping experience into your home is an obsession. This Tea Maker is designed for the tea drinker who appreciates true taste steeped to perfection. Enjoy!

Before first use

Always clean your kettle before first use

1. Wash the inside of the kettle, the tea infuser and lid with mild detergent and water. Rinse each thoroughly. The tea infuser is the ONLY item dishwasher safe.
   
   Do not immerse the kettle or power base in water or any other liquid.
2. Do not use scouring pads, steel wool or any form of strong solvents or abrasive cleaning agents to clean the appliance, as they can damage the external surfaces at the appliance.
3. Allow the appliance to dry fully after cleaning before using.
   
   The appliance must not be used if the base or the underside at the appliance is wet.
4. Your tea maker is now ready for use!

USING YOUR TEA MAKER.

SETUP

1. Position the power base on a flat, heat-resistant surface, as close as possible to a power outlet.
2. Follow cord routing in power base according to exit patterns. Proper cord routing will result in the power base laying flat when the kettle is placed in the base.
   
   Do not operate kettle if power base is not flat. If power base is not flat, remove kettle from power base and repeat cord placement instructions.
3. 
   Add fresh cold water to the desired level
   Do not exceed the 'MAX* water level mark indicated on the kettle.
4. Add the kettle lid on tap make sure it lines up with the handle.
5. Then, add the infuser lid on the infuser holder. To lock this lid turn it until the arrow lines up with "closed"
   Note: Do not install the tea infuser unless you are making tea.
6. Plug the electric cord into an electric outlet. All lights will go ON, then OFF and the Stop button will remain ON-Blue indicating its ready mode.
7. Kettle is ready to use!

BOIL WATER

1. To boil water press the "BOIL" button to start the heating process. During heating, the Boil button will light up, and the Stop button will PULSE-Red.
2. When the water has reached boiling, the kettle will beep 1 times and automatically switch to keep warm made.
   Note: Kettle can he removed from base anytime during keep warm mode for use, but should be returned to base to maintain the keep warm functionality. Once the water has cooled slightly, the unit will turn on and off to maintain the temperature at a constant 195F. For your convenience, the unit will automatically switch off after 30 minutes.
3. To turn off the keep warm mode at any time simple press "STOP*
4. Hat water Is ready to use!

MAKE TEA

To make tea, after setting up the tea maker + kettle, follow these steps.

Heat Water

1. After adding cold water, select the button that corresponds to the tea type of your preference by pressing it one time.
   Note: During the heating process, the tea button will PULSE and the Stop button will be ON red.
2. When the water has reached the proper temperature, the kettle will BEEP and the tea button will
   FLASH to let you know it's tine to add your favorite tea!

Add Tea

3. Fill the tea infuser with desired amount of tea. Taste of tea is personal, but for most tea types it is recommended to use 1 tsp to 1.5 tsps. or 1 bag per cup of water. We suggest you follow the tea suppler recommendations for optimal results.
4. Open the tea infuser lid by turning it, so the arrow lines up with "open" mark.
5. Place the tea infuser into the infuser holder by lining up the infuser handle with the kettle handle.
6. Gently press ingredients down with a spoon to make sure they are fully immerse in water during the steeping process.
7. Add the lid on top of the tea infuser to lock this lid, turn it until the arrow lines up with "closed"

Set Steeping Time

8. To set the default steeping time, press the same button again.
9. Once the steeping time is completed, the kettle will beep and lights will flash, and then the kettle will enter the keep warm mode automatically. It is recommended to remove the tea infuser to avoid over steeping the tea.
   Note: Kettle can be removed from base anytime during keep warm mode for but should be returned to base to maintain the keep warm functionality. Once the water has cooled slightly, the kettle will turn on and off to maintain the temperature warm. For your convenience, the kettle will automatically switch off after 60 minutes.
10. If you do not want the keep warm mode, simply press "STOP"
11. Tea is ready, pour and enjoy!

CUSTOM STEEPING TIME

To set custom steeping time, replace step 8 with:
8.a. Within 3 second, press the same button again, then one time for each minute you want to add. When done, the kettle will beep once for each minute of steeping time you selected to let you know the setting.
For example— if you want to steep for 4 minutes, press the button 5 times continuously. 1 time to enter custom mode + 4 times for the 4 minutes. The kettle will beep 4 times.

KEEP WARM MODE

The product incorporate a keep—warm function, which maintains the tea at a pre—determined temperature for 60 minutes and water for 30 minutes. The keep warm feature is ideal for different tea steeping, family breakfast and cooking. The keep warm feature will not boil the water.

1. Once the steeping time is completed, the kettle will beep and enter the keep warm mode automatically.
   Note: Kettle can be removed from base anytime during keep warm mode for use, but should be returned to base to keep warm.
2. After 60 minutes the keep warm will shut off for tea and after 30 minutes the keep warm will shut off for boiling water.
3. If you do not want the Keep Warm mode, simply press STOP.

Turn Off The Unit

If you want to stop the heating process, simply press STOP/OFF once. If you want to turn off the unit, press and hold STOP/OFF until the light goes off.

Anti boil—dry device

If you switch the appliance on without there being any water in it or when the water level is too low, the anti boil-dry device will automatically switch it off. The appliance can be switched on normally as soon as it is filled with a sufficient amount of water.

Care And Cleaning Instructions

Cleaning Your Kettle

1. Mineral deposits in tap water may cause scale deposits to form inside the electric kettle after frequent use. To remove this scale build-up, fill the kettle with a solution of 3 cups of vinegar and 3 cups water. Let sit overnight.
2. Empty the vinegar solution from the electric kettle. Remove any stain remaining inside by rubbing with a damp cloth.
3. Fill the electric kettle with clean water. Place kettle on power base and bring to a bail, then discard water. Repeat, and the electric kettle will be ready to use.
4. The electric kettle will not operate again until the Power Button is pressed downward.
5. The outside of the electric kettle can be wiped with a soft damp cloth.

Do not immerse kettle or power base in water or other liquid.

Note: Never use any chemical, steel wool, or abrasive cleaners to clean any part of the kettle, including the power base.

MAINTENANCE

This appliance has no user serviceable parts beyond the care and cleaning described in the Care and Cleaning section.
Any other servicing should be performed only by an authorized service representative.

Technical specifications

Product name: Tea Maker
Product model: <2423
Rated power: 1200W
Rated voltage: 120V~60Hz Maximum capacity: 1.2L

German Schott glass SUS304(OOCr19Ni10) and SUS316L (0220Cr17Ni12Mo2) stainless steel, Polypropylene PP plastic, silicone for food contact is adopted.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Buydeem K2423 Electric Tea Maker with Infuser 1.2L