Related Manuals for ACME TS-150M WW
Summary of Contents for ACME TS-150M WW
- Page 1 毅丰 2017.06.27 受控正本 TS-150M CW TS-150M WW User Manual Please read the instruction carefully...
-
Page 2: Table Of Contents
CONTENTS 1. Safety Instructions ................. 2 2. Technical Specifications ................. 3 3. The Plate for Color Filter & Barn Door Installation ......... 4 4. How To Set The Unit................5 4.1 Control panel ................... 5 4.2 Main Functions ................6 5. -
Page 3: Safety Instructions
1. Safety Instructions Please read the instruction carefully which includes important information about the installation, usage and maintenance. WARNING Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction manual. ... -
Page 4: Technical Specifications
◆ Rotating barn door and hanger ◆ LCD display for easy navigation ◆ Knobs for manually control of zoom and dimming are available at rear side Power supply: AC 100~240V, 50/60Hz Power consumption: 187W Color Temperature: 5550+50K (TS-150M CW) 3150+50K (TS-150M WW) -
Page 5: The Plate For Color Filter & Barn Door Installation
Light Source: 1 × 150W white LED CRI: ＞ ＞ Weight: 8.6Kgs Dimension: 340×435×417mm 3. The Plate for Color Filter & Barn Door Installation Fig. 1 ○ At first, please push the Lock Cap button by hand as the arrow , and move away the Lock as the ○... -
Page 6: How To Set The Unit
Fig. 2 ○ Secondly, please insert the Barn Door into the outside slot from topside as arrow , and fasten the lock (Note: the Barn Door must be fastened into the inside of the lock’s hook ); then flip down ○... -
Page 7: Main Functions
DMX input present 3. Button: MENU To select the programming functions DOWN To go backward in the selected functions To go forward in the selected functions ENTER To confirm the selected functions 4. Dimmer: Manual adjust the dimmer value. 5 Zoom: Manual adjust the zoom value. 6. - Page 8 IP Adress Ethernet IP Setup Subnet Mask DMX Setting Art-Net Setup Art-Net Port Setup Subnet Universe Channel Mode Linear Curve Sq. Law Cueve Dimmer Cueve Setting Nvert Sq. law Cueve S Curve DMX Last State Hold Invert Display...
- Page 9 DMX Setting Enter menu mode, select DMX Setting, press ENTER button to confirm, use UP/DOWN button to select DMX Address, Art-Net Setup, Channel Mode. DMX Address Select DMX Address, press the ENTER button to confirm, the present address will blink on the display.
- Page 10 Square Law: Light intensity control is finer at low levels and coarser at high levels. Inverse Square Law: Light intensity control is coarser at low levels and finger at high levels. Linear: The increase in light intensity appears to be linear as DMX value is increased. S-cure: Light intensity control is finger at low levels and high levels and coarser at medium levels.
- Page 11 display, use the UP/DOWN button to adjust value from 1 to 30, press the ENTER button to save. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode. Backlight Auto Off Select Backlight Auto Off, press the ENTER button to confirm, present mode will blink on the display, use the UP/DOWN button to select Yes (display goes off one minute after exiting menu mode) or No (display always on), press the ENTER button to save.
-
Page 12: How To Control The Unit
on the display. Press the MENU button back to exit. Factory Setting Select Factory Setting, press the ENTER button to confirm, present mode will blink on the display. Use the DOWN and UP button to select the No or Yes (Switch back to default settings). Hold and press the MENU button about one second or wait for one minute to exit the menu mode. -
Page 13: Dmx 512 Configurations
1 Channel: 2 Channel: 5.3 DMX 512 Configurations 1 Channels Mode: CHANNEL VALUE FUNCTION DIMMER 000 ~ 255 0 100% 2 Channels Mode: CHANNEL VALUE FUNCTION DIMMER 000 ~ 255 0 100% DIMMER FINE 000 ~ 255 0 100%... -
Page 14: Dmx 512 Connections
6. DMX 512 Connections The DMX512 is widely used in intelligent lighting control, with a maximum of 512 channels. 1. Connect the fixture together in a “daisy chain” by XLR plug cable from the output of the fixture to the input of the next fixture. The cable cannot be branched or split to a “Y” cable. Inadequate or damaged cables, soldered joints or corroded connectors can easily distort the signal and shut down the system 2. -
Page 15: Troubleshooting
7. Troubleshooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A. The unit does not work, no light and the fan does not work 1. Check the connection of power and main fuse. 2. - Page 16 D eclaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC. EN55103-1: 2009 ; EN55103-2: 2009; EN62471: 2008; EN61000-3-2: 2006 + A1:2009 + A2:2009; EN61000-3-3: 2008. &...
Need help?
Do you have a question about the TS-150M WW and is the answer not in the manual?
Questions and answers