How To Use The Quick Navi Screen - Sony Alpha 7R IV Operating Instructions Manual

To change the functions in the function menu
(Function Menu Set.)
The following is the procedure for changing [Drive Mode] in the function
menu for still images to [Grid Line].
• To change the function menu for movie shooting, select an item that
you want to change from the function menu for movie shooting in

step .
 MENU 
 Select
(Drive Mode) from among the 12 functions for
still image shooting in the function menu using the top/
bottom/left/right side of the control wheel, and then press
the center.
 Press the left/right side of the control wheel until
[Grid Line] is displayed. Select [Grid Line], and then press
the center.
• (Grid Line) will be displayed in the former location of
(Drive Mode) in the function menu.

How to use the Quick Navi screen

The Quick Navi screen is a function optimized for shooting with the
viewfinder, that lets you control settings directly.
1
Select MENU 
[Monitor].
2
Place a mark on [For viewfinder] and then select [Enter].
3
Press the DISP on the control wheel to set the screen mode to
[For viewfinder].
(Camera Settings 2)  [Function Menu Set.].
(Camera Settings 2)  [DISP Button] 
GB
23