LG WT1310BRK Owner's Manual page 21

4
Use the provided tie strap
drain hoses in place.
NOTE
• The drain hose should not be placed higher than
80 cm above the floor. Water in the appliance
may not drain or may drain slowly.
• Securing the drain hose correctly will protect the
floor from damage due to water leakage.
• If the drain hose is too long, do not force it back
into the appliance. This will cause abnormal
noise.
• If the drain hose is installed in a way that leaves
it bent or pinched, drainage may not function
properly.
• Depending on the installation environment, you
may have to purchase a separate drain hose
connector. The connector supplied will suit a
standard laundry tub side drain hole.
to secure the 2
b
• Use the elbow bracket
connector if necessary. When installing the
b
drain hose to a sink, secure it tightly with string.
Connecting Hoses to the Drain
Hose Connector (Optional)
Additionally follow the steps below to connect the
drain hose using drain hose connector if the above
installation is not sufficient.
1
Slide the included band clamp onto the end of
the drain hose of the washer.
2
Connect the drain hoses from the washer and
dryer to the drain hose connector. Tighten the
INSTALLATION
and the drain hose
a
21