Table of Contents
Advertisement
Available languages
Available languages
lation. Press OK button to continue.
Aerial Installation
If you select AERIAL option from the Search
Type screen, the television will search for digital
terrestrial TV broadcasts.
NOTE: You can press MENU button
to cancel.
After all the available stations are stored, the
Channel List will be displayed on the screen.
If you like how the channels are sorted ac-
cording to the LCN (*), please select "Yes"
and than press OK.
Press MENU button to quit channel list
and watch TV.
(*) LCN is the Logical Channel Number
system that organizes available broadcasts
in accordance with a recognizable channel
sequence (if available).
Cable Installation
If you select CABLE option and press OK
button on the remote control. To continue,
please select YES and press OK. To can-
cel operation, select NO and press OK.
You can select frequency ranges from this
screen.
Enter the frequency range manually by us-
ing the numeric button.
NOTE: Searching duration will change
depending on the selected search step.
Satellite Installation
If you select Satellite option from the
Search Type screen, you can set a satellite
and watch the satellite channels. When you
select Satellite installation, Antenna Type
menu will be displayed.
There are three types of antenna selection.
You can select Antenna type as Direct,
Unicable or DiSEqC switch by using " "
or " " buttons.
Direct: If you have a single receiver and a
direct satellite dish, select this antenna type.
After selecting Direct, another menu screen
will be displayed. Select an available satellite
and press OK to scan for services.
Unicable: If you have multiple receivers and
a unicable system, select this antenna type.
Press OK to continue. Configure settings
by following instructions on the screen.
Press OK to scan for services.
DiSEqC switch: If you have multiple sat-
ellite dishes and a DiSEqC switch, select
this antenna type. After selecting DiSEqC
switch, another menu screen will be dis-
played. You can set four DiSEqC options
(if available). Press GREEN button to scan
all satellites or press YELLOW button to
scan only the highlighted satellite. To save
and exit press OK button.
Media Playback via USB Input
You can connect a 2.5" and 3.5" inch (hdd
with external power supply) external hard
disk drives or USB memory stick to your TV
by using the USB inputs of the TV.
IMPORTANT! Back up your files before
making any connections to the TV. Manu-
facturer will not be responsible for any file
damage or data loss. Certain types of USB
devices (e.g. MP3 Players) or USB hard disk
drives/memory sticks may not be compat-
ible with this TV. The TV supports FAT32
and NTFS disk formatting but recording will
not be available with NTFS formatted disks.
While formatting a USB hard disk that has
1TB (Tera Byte) or more file capacity, you
can experience problems with the format-
ting process. Do not repeatedly quickly
plug and unplug the drive. This may cause
physical damage to the USB player and
USB device itself. Do not pull out USB
English-49
Advertisement
Chapters
Table of Contents
