Using My Button 1 (*); Using My Button 2 (*) - Hi-level 40HL500 Operating Instructions Manual

20. Rapid advance: Moves frames forward
in media such as movies
21. Pause: Pauses the media being played,
22. Screen: Changes the aspect ratio of
the screen
23. Text: Displays teletext (where
available), press again to superimpose
the teletext over a normal broadcast
picture (mix)
24. My button 2 (*)
25. EPG (Electronic programme guide):
Displays the electronic programme
guide
26. Exit: Closes and exits from displayed
menus or returns to previous screen
27. Quick Menu: Displays a list of menus
for quick access
28. No function
29. Programme +/-
30. Swap: Quickly cycles between
previous and current channels
31. Source: Shows all available broadcast
and content sources

Using My button 1 (*)

Press MY BUTTON 1 for five seconds
when on a desired source, channel or link,
until the "MY BUTTON IS SET" message
is displayed on the screen. This confirms
that the selected MY BUTTON is now
associated with the selected function.

Using My button 2 (*)

This button's main function is to switch be-
tween DVB-T, DVB-C and DVB-S broad-
casts. However, if you press MY BUTTON
2 for five seconds, you can set a function to
it as described in My Button 1.
Note that if you perform first time instal-
lation, MY BUTTON 2 will return to its
default function, switching between DVB-T,
DVB-C and DVB-S broadcasts.
English-46