Samsung QP65A-8K User Manual page 91

" The power indicator may not be
supported depending on the
model.
Screen issue
The images on the screen look distorted.
The screen is not clear. The screen is blurry.
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
The screen is too bright. The screen is too dark.
Screen colour is inconsistent.
White does not really look white.
There is no image on the screen and the power indicator
blinks every 0.5 to 1 second.
The product will turn off automatically.
The screen display does not look normal.
Check the cable connection to the product.
Set the resolution and frequency to the recommended level.
Check that the resolution and frequency of the PC and graphics card are set within a range
compatible with the product. Then, change the screen settings if required by referring to 'Preset
Timing Modes'.
Go to Picture and adjust the Brightness
Go to Picture → Advanced Settings and adjust the
Go to Picture → Advanced Settings and adjust the
The display is turned off to save energy.
Press any key on the keyboard or move the mouse to return to the previous screen.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off after
10 to 15 minutes.
Encoded video content may cause the display to appear corrupted in scenes featuring fast
moving objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not
mean the product is defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital
products.
and Contrast settings.
Colour Space Settings settings.
White Balance settings.
91