Removing The Speakers; Installing The Speakers - Dell Precision 5530 Service Manual

b base cover
5 Follow the procedures in
Speaker

Removing the Speakers

1 Follow the procedures in
2 Remove the:
a base cover
b battery
3 Perform the following steps to remove the speaker:
a Disconnect the speaker cable from the system board [1].
b Remove the M2x2 (4) screws that secure the speakers to the computer [2].
c Lift the speakers, along with the speaker cable, off the computer [3].

Installing the Speakers

1 Using the alignment posts, place the speakers on the palm-rest assembly.
2 Replace the M2x2 (4) screws that secure the speakers to the palm-rest assembly.
3 Route the speaker cables through the routing guides on the palm-rest assembly.
4 Connect the speaker cable to the system board.
5 Install the:
a battery
b base cover
6 Follow the procedures in
16 Disassembly and reassembly
After Working Inside Your Computer.
Before Working Inside Your
After Working Inside Your Computer.
Computer.