Using External Equipment; Experiencing Hd Images; Types Of Connection; Displaying An External Equipment Image - Sharp Aquos LC-19SB280UT Operation Manual

Using external equipment

Experiencing HD images

An HDTV without an HD source is just an ordinary TV.
To enjoy HD images on the TV, you should get HD programming from the following:
• Over-the-air broadcasting via HD quality antenna
• HD cable/satellite subscription
• HD compatible external equipment
NOTE
• For information on updating to HD programming, ask your cable/satellite service provider.

Types of Connection

Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external
equipment and use its appropriate terminals for higher quality images.
For connecting the TV to external equipment, use commercially available cables.
• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
Image Terminal on external
Quality equipment
HD
Quality
DVI OUT
AUDIO
Standard
Quality

Displaying an External Equipment Image

To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.
NOTE
• For information on updating to HD programming, ask your cable/satellite service provider.
0. TV
1. Input1
2. Input2
3. Input3
4. Input4
[0-4]:Select
Cable
HDMI-certified cable
DVI-HDMI conversion cable
Ø 3.5 mm stereo minijack cable
Component video cable
Audio cable
S-VIDEO cable
Audio cable
AV cable
1
Press INPUT.
•
2
Press 0-4 to select the input source.
•
•
•
Input Select
A list of selectable sources appears.
Each time INPUT is pressed, the input source toggles.
TV Input1 Input2
Input4 Input3
You can also select the input source by pressing ▲/▼.
An image from the selected source automatically displays.
Terminal on the TV
⇒Page 14
⇒Page 14
⇒ Page 15
⇒ Page 15
⇒ Page 15
13