Samsung WA16T6260 Series User Manual page 39

Code
9C1
9C2
9C4
AC6
dC
HC
LC
OC
PC
WA6000T_WA16T6260_DC68-04152H-00_EN.indd 39
Electronic Control Problem (Over Voltage Error)
• Check the PCB and wire harness.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
Low voltage detected
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
DC Sensor electrical leakage problem
• If the information code remains, contact a customer service
centre.
Inverter Communication problem
• Check the Inverter PCB and wire harness.
• If the information code remains, contact a customer service
centre.
Operating the washing machine with the lid open.
• Make sure the lid is properly closed.
• Make sure laundry is not caught in the lid.
Water temperature control problem (Heater control)
• If the information code remains, contact a customer service
centre.
Check the drain hose.
• Make sure the end of the drain hose is placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
Water is overflowed.
• Restart after spinning.
• If the information code remains on the display, contact a local
Samsung service centre.
When position of the clutch can't be detected.
• If the information code remains, contact a customer service
centre.
Action
English 39
2020-09-29 12:04:47