Table of Contents
Advertisement
Problem
Vibrates excessively
or makes noise.
Stops.
WA6000T_WA16T6260_DC68-04152H-00_EN.indd 35
•
Make sure the washing machine is set on a level floor. If the
floor is not level, use the levelling feet to adjust the washing
machine.
•
Make sure the washing machine is not contacting any other
object.
•
Make sure the laundry load is balanced.
•
Make sure the laundry is spread evenly in the washing
machine. Spread out the laundry evenly and start again.
•
Make sure the space around the washing machine is free of
objects.
•
Humming is produced normally during operation.
Objects such as coins can cause noise. Remove these objects
•
from the washing machine after washing is complete.
•
Plug the power cord into a live electrical outlet.
•
Check the fuse or reset the circuit breaker.
•
Close the lid, and press START/PAUSE to start the washing
machine. For your safety, the washing machine will not spin
unless the lid is closed.
•
Before the washing machine starts to fill, it will make a series
of clicking noises to check if the lid is locked, and does a quick
drain.
•
There may be a pause or soak period in the cycle. Wait briefly
and the washing machine may start.
•
Make sure the inlet hose screens at the taps are not clogged.
Periodically clean the screens.
•
This problem occurs temporarily due to low voltages, and will
be solved when power recovers.
Action
English 35
2020-09-29
12:04:46
Advertisement
Table of Contents
