Detailed Safety Regulations - Briggs & Stratton NAX 400C Manual


Store the unused equipment out of the reach of children. Do not allow people not familiar with the tool or this manual to use
the equipment. Internal combustion tools and equipment are dangerous in the hands of untrained users.

Internal combustion tools must be maintained. Check alignment or jamming of moving parts, cracked parts and all other
factors that may affect the operation of the device. If damage is found, the equipment must be repaired before use. Many
accidents are caused by improper repair and / or maintenance of the equipment.

Before using the device, replace all defective, worn and damaged parts. Replace with new warning signs on the device if
they become illegible or damaged.

Warning decals and spare parts can be ordered from NAX service and authorized dealers.

An internal combustion tool, equipment, working tools etc. should be used in accordance with these instructions, taking into
account the conditions and the type of work to be performed. Using the device in a manner not intended for it may be
dangerous.
OPERATION AND EXPLOITATION OF TOOLS EQUIPPED WITH A BATTERY

Before inserting batteries into the tool, make sure that its on / off switch is in the "off" position. Inserting the batteries into the
device when the on / off switch is in the "on" position can cause serious injury.

Use only the charger recommended by the manufacturer. Using a charger to charge other types of batteries may cause a
fire.

Never use batteries other than those recommended by the manufacturer. Use of other batteries may result in serious injury
or fire.

When the device is not in use, remove the battery. The battery should be kept away from metal objects such as paper clips,
coins, nails, screws, etc., which may short-circuit the battery terminals. Shorting the battery terminals together may cause
burns or a fire.

Under extreme conditions, liquid may escape from the battery. You must avoid contact with it. If it accidentally it comes into
contact with liquid - rinse immediately with water. If liquid gets in your eyes, contact your doctor immediately. Liquids leaking
from the battery may cause irritation or burns.

It is forbidden to use chargers and power supplies outside the rooms and in rooms with high humidity such as bathrooms or
basements.
CAUTION! Chargers and power supplies for battery devices are intended for indoor use in a dry environment.
Danger of electric shock and / or damage to the device.
REPAIR

Before carrying out any adjustment, part replacement or storage, the spark plug wire must be removed. Such preventive
safety measures reduce the risk of accidental starting.

Repair should be performed by a qualified person using only original spare parts. This will ensure further safe operation of
the device. It is recommended to have any service performed by an authorized NAX service center.
CAUTION!
Danger of suffocation when children play with the packaging. The packaging, especially the foil bag, should be stored out
of the reach of children.
DETAILED SAFETY REGULATIONS FOR PETROL CHAINSAW
WARNING!

Observe all safety instructions, operation manual, descriptions and data supplied with the device. Failure to follow the
instructions below may pose a risk of serious injury.

Use a soft, dry cloth to clean the chain saw. Never use any detergent or alcohol.

Use personal protective equipment: safety glasses or goggles, protective gloves, protective footwear and protective clothing.
Wear ear protectors. Exposure to noise over a long period of time may result in hearing loss.

Regularly clean the equipment's ventilation slots. The engine blower draws dust into the housing, and large accumulation of
metal dust can cause electrical hazards.

You can only use the chain saw in good technical condition, perform the necessary actions if necessary or contact the
service center. It is recommended to use the services of an authorized NAX service.

Before starting, check if:
 The device is assembled in accordance with the operating instructions;
 The cutting tool is in good technical condition; regularly check chain attachment, damage and wear;
15