Advertisement
Quick Links
QUICK START GUIDE
GETTING STARTED
1
Remove Solution Tank from
the unit.
HOW TO USE
SPRAY
Spray a generous amount of
cleaning formula over stain
by pressing the trigger
behind the tool.
CLEANSLATE
CARPET & UPHOLSTERY
SPOT CLEANER WITH
POWERED SCRUBBING KIT
2
Add cleaning formula to
Solution Tank using the ratio
chart in manual and included
measuring cup.
SPIN
Place the SpinScrub tool on
the stain and allow the tool to
rotate on the spot.
™
3
Slide tank back into the unit.
Unwrap hose from unit and
attach preferred tool.
SUCTION
Apply downward pressure on
the front of the cleaning tool
and pull towards you to lift
the stain. Repeat as needed.
Advertisement
Related Manuals for Hoover CLEANSLATE FH14052V
Summary of Contents for Hoover CLEANSLATE FH14052V
- Page 1 CLEANSLATE ™ CARPET & UPHOLSTERY SPOT CLEANER WITH POWERED SCRUBBING KIT QUICK START GUIDE GETTING STARTED Remove Solution Tank from Add cleaning formula to Slide tank back into the unit. the unit. Solution Tank using the ratio Unwrap hose from unit and chart in manual and included attach preferred tool.
- Page 2 TOOLS FOR EVERY MESS SpinScrub Tool Tight Spot Tool Hose Rinse Tool Tackle tougher stains with less Clean crevices, corners, Flush the hose with water to effort. baseboards and other tough to remove any left behind dirt & reach areas. debris after use.