Advertisement

Quick Links

Manual
AFP- 80
Reverso Pumps, Inc.
www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AFP- 80 and is the answer not in the manual?

Questions and answers

Summary of Contents for Reverso AFP- 80

  • Page 1 Manual AFP- 80 Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 2: Table Of Contents

    201 SW 20th Street, Fort Lauderdale, FL 33315 Ph: (954) 522-0885 | Fax: (954) 522-0456 The information herein is the property of Reverso Pumps, Inc. Without written permission, any copying, transmitting to others, and other use except for which it is loaned is prohibited.
  • Page 3: System Overview

    6. Drain valve - Push in and turn counter-clockwise to open 7. Control panel 8. Hinged cover - covers pump and outlet 9. Outlet 10. 2 micron filter 11. Spill sensor 12. Drip pan 13. Pump Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 4: Control Panel Overview

    12. Up key 13. Right key 14. Down key 15. OK key Digital Timer 16. Escape key 11 12 13 M - W - F - - MTWTFSS 11:00 15:00 Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 5: Technical Specifications

    The system is designed to meet environmental standards for safe operation (NOT for use with fluids that have a flash point below 135°F (38°C), e. g.: Gasoline, alcohol, aviation fuels...) Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 6: Electrical And Installation

    Make sure that your unit and power supply are configured for the same voltage rating. • Dry contacts are for external use. • External control voltage must be supplied by customer. Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 7: Tank Diagrams

    Fuel Tank Tank Tank Tank Fuel Tank Multiple Tank Diagram Requires Advanced Control (Touchscreen) Diag. 3 Solenoid valve Foot valve Ball valve Fuel Fuel Fuel Fuel Tank Tank Tank Tank Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 8: Initial Setup

    The emergency stop button is located on the right side of the enclosure, if equipped. Turn clockwise and press down to shut down the operation. Press the reset button. Then press the start button to resume operation. Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 9: Digital Timer Instructions: Set Date And Time

    Now shown is the current time screen. Press UP current time screen. key to return to program screen. Set Clock Th 19:35 S/W Time.. 2012-01-26 Sync Stop Set Param Set.. Prg Name MTWTFSS MTWTFSS 11:00 15:00 Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 10: Digital Timer Instructions: Set Schedule Timer

    Every 5 seconds, screen will request user to push Afterwards, every 5 seconds screen will indicate the Start button to activate pogram. schedule timer is active. To Activate Automatic Push the Timer Start Active Button Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 11: Digital Timer Instructions: Set Manual Timer

    In the screen shown below, the system is set to run for ESC to save. Flashing underline will disappear. 20 minutes and will stop once the time has expired. Manual Manual CURR 00:00 CURR 00:00 20:00 20:00 Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 12: Digital Timer: Alarms

    High Water Alarm DRAIN BOWL HI-VAC High Vacuum Alarm BACK FLUSH FILTER Backflushing procedure can be executed up to 5 times before replacing the filter element. HI-PRESS Hi Pressure Alarm Check Discharge Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 13: Backflushing Instructions

    If necessary, repeat step 4 and 5. Prime the filter and close Open fuel supply valve. the bleed screw (refer to Technical Specifications for torque values). Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 14: Filter Element Replacement

    (refer to and check for leaks. Technical Specifications for torque values). Replacement Filter Element Element # Description 00510/50 10 Micron 00530/50 30 Micron (Standard) 00560/50 60 Micron (Stainless Steel) Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
  • Page 15: Troubleshooting

    Check service switch is in the ON position ( - ) Pump leaks fuel • Loose pump plumbing fittings • Worn pump shaft seal • Excessive heat from over head storage tank • Worn pump 0-rings or seals Version 10/7/13 Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...

Table of Contents