Lenovo IdeaCentre D400 Series Hardware Maintenance Manual page 34

Hardware Maintenance Manual
Operating
condition
Bit 0
After system
boot
Error code
Bit 1 Bit 2 Bit 3
Hard disk drive failed
1. Reseat the following components:
2. Replace the following components one at a
Description/Action
- Hard disk drive
- Cable from the hard disk drive backplane
to the system board
time, in the order shown, restarting the
home center each time:
- Hard disk drive
- Cable from the hard disk drive backplane
to the system board
- Hard disk drive backplane
- System board
29