Honda CR-V 2008 Manual page 91

Main Menu
To program the Park Unlock mode:
Unlocks the driver's door or all doors
and tailgate when the shift lever is
moved to Park (P) position.
1. Make sure the shift lever is in the
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
Table Of Contents
3. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click.
Continue to hold down the switch:
Until you hear another click
(after about 5 seconds) to
activate
feature,
Or, until you hear two more
clicks (after about 10 seconds)
to activate
unlock feature
4. Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position.
WWW.PlanDeGraissage.ORG
driver's door unlock
all doors and tailgate
.
Door Locks
To program the Ignition Switch
Unlock mode:
Unlocks the driver's door or all doors
and tailgate when the ignition switch is
moved out of the ON (II) position.
1. Make sure the shift lever is in the
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
CONTINUED
87