1090 Fan Assembly And Heat Sink Assembly - Lenovo G460e Hardware Maintenance Manual

Lenovo G460e/G560e Hardware Maintenance Manual

1090 Fan assembly and Heat Sink assembly

For access, remove these FRUs in order:
• "1010 Battery pack" on page 34
• "1020 Dummy card" on page 35
• "1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
• "1040 Hard disk drive" on page 37
• "1050 Optical drive" on page 39
• "1060 DIMM" on page 40
• "1070 PCI Express Mini Card for wireless LAN/WAN" on page 41
• "1080 Keyboard" on page 43
• "1100 Keyboard bezel" on page 48
• "1110 System board" on page 53
Figure 9. Removal steps of fan assembly and heat sink assembly
Detach the fan connector in the direction shown by arrow
screws
When installing: Make sure that the fan connector is attached firmly to the
system board.
46
compartment cover" on page 36
b
to lift the fan assembly.
Step Screw (quantity)
a
M2.5 × 4 mm, flat-head, nylok-coated (3) Black
a and loosen three
2
2
1
2
Color Torque
1.5 ~ 2.0 kgfcm