Related Service Information; Restoring The Factory Contents By Using Onekey Recovery; Restore Of Factory Default; Using Recovery Discs - Lenovo G460e Hardware Maintenance Manual

Related service information

This chapter presents the following information:
• "Restoring the factory contents by using OneKey Recovery" on page 23
• "Passwords" on page 24
• "Power management" on page 25

Restoring the factory contents by using OneKey Recovery

Restore of factory default

The Lenovo G460e/G560e computers come with pre-installed OneKey Rescue
System. In order to save application files and the initial backed up files of the
system, the hard disk in a Lenovo computer includes a hidden partition when it
is shipped. If you need to restore the system to the point of your first boot up, just
enter Lenovo OneKey Rescue System and run Restore to factory default. For
details of OneKey Rescue System, see the User Guide for OneKey Rescue System.
Note: This will delete all the new data on the system partition (C drive),
which is not recoverable. Make sure to back up your critical data before you
perform this action.

Using recovery discs

When you replace a hard disk drive in your computer, you are unable to use the
pre-installed Lenovo OneKey Recovery and OneKey Rescue. However, you can
use the recovery discs that store your backed up data to restore your new hard
drive to a previous backup status.
Note: You can create recovery discs by burning the backup image to a CD/
DVD as recovery discs. For details of Create recovery discs, see the User
Guide for OneKey Rescue System.
Related service information
23