Preparing Coffee Drinks Via Direct Access; Preparing Milky Drinks Via Direct Access - Krups YY3071FD Manual

Stopping a drink during preparation
You can stop the preparation at any time by pressing the return button
Caution, pressing this button causes the machine to update which may last up to 30 seconds. This phase is normal.
When a cycle is interrupted, it does not stop immediately. The machine will finish its cycle and the preparation will be
cancelled.
"Double" preparation function
You can prepare two cups simultaneously with your appliance. The double preparation function can be accessed simply
by pressing the selection twice and is valid for all drinks (except
DARK function
The "DARK" function allows you to increase the intensity of the coffee (its strength).
You can activate or deactivate it in various ways:
- Before selecting the chosen drink just press DARK.
- While preparing the drink, and until the end of grinding: you can press DARK.
- By choosing the "DARK" parameter in the Settings menu. To do this, access the Settings menu with the button
, then Settings  drink settings  Dark. The function will be activated for all "coffee" drinks:
You can do the same to deactivate it.
EXTRA SHOT function
The "extra shot" function allows you to add an espresso at the end of the selected drink.
You can activate or deactivate it in various ways:
- Before selecting the chosen drink: just press EXTRA SHOT.
- While making the drink,
- By choosing the "EXTRA SHOT" parameter in the Settings menu. To do this, access the Settings menu with the button
, then Settings  drink settings EXTRA SHOT. Therefore, the function will be activated for all preparations
, , , , .
You can do the same to deactivate it.

PREPARING COFFEE DRINKS VIA DIRECT ACCESS

N.B.: Every time the drink is launched, the machine will remember the last drink prepared, including the settings that
were selected.
Preparation
Place the cup(s) under the coffee nozzles. Fig.12
Press the button for the desired drink.
If the machine detects a lack of water when you request this preparation, it will ask you to fill the tank.
Possible settings
It is possible to increase the strength of the coffee by pressing
You can prepare one or two cups with your appliance.
The machine starts by grinding the beans, tamping the ground coffee and finally brewing the coffee. It is possible to
adjust the volume of the coffee being prepared by using the buttons:
You can stop the preparation at any time by pressing
Important: Automatic rinsing of the coffee outlets: according to the type of preparation, the machine may
complete an automatic rinse program when it switches off. The cycle lasts only a few seconds and
stops automatically.

PREPARING MILKY DRINKS VIA DIRECT ACCESS

Possible settings
It is possible to increase the strength of the coffee by pressing
The steam is used to froth the milk. As a higher temperature is required when producing steam, the appliance will run
an additional pre-heating phase.
24
.
and ).
and/or adding a coffee preparation by pressing
and
.
and/or adding a coffee preparation by pressing
, ,
.
, .
.
.