We TARVOS-III Migration Manual page 13

WIRELESS CONNECTIVITY & SENSORS
ANR022 - Radio module cross migration guide
The internal PCB antenna of Thyone-I module on adapter board can be used
only if the no metal area in footprint is implemented on the host PCB.
The Tarvos-III and Telesto-III are available in two hardware variants. The
first variant provides the radio signal at the ANT pin.
2609011181000 (Tarvos-III) and 2609011191000 (Telesto-III) an external
antenna matched to 50
The second variants 2609011081000 (Tarvos-III) and 2609011091000
(Telesto-III) offers an integrated PCB antenna. The integrated PCB antenna
is strongly miniaturized and therefore supports reduced efficiency and range.
Using this variant the ANT pin has no function and can be left open. No
external antenna has to be connected.
different connection variant is described in chapter 4.1.3
Version 1.1, July 2023
can be connected at this pin.
The explanation how to use the
In this variants
www.we-online.com/wcs
12