Replacing the camera
panel" section.
9. Install the computer cover. Refer to "Completing the installation" .
To replace the camera
1. Remove the computer cover. Refer to "Removing the computer cover" .
2. Remove the LCD panel. Refer to steps 2 to 4 of the "Replacing the LCD
panel" section.
3. Remove the two screws that secure the camera to the chassis 1 and
disconnect one end of the camera cable from the rear of the camera
and the other end of the cable from the system board 2 .
4. Pull the camera away from the chassis.
Chapter 7. Replacing hardware
53