Advertisement
1.7
Opening the Console
WARNING
The console should be repaired by qualified, professional, & experienced, audio technicians ONLY. Before beginning any type of repair
or opening the console CALL Arrakis customer support for recommendations.
ACCESSING THE MOTHERBOARD
The motherboard is accessed from the bottom of the console. Six screws must be removed from the bottom panel to have access to the console electronics for test and IC replace-
ment. Be careful to not scratch the console when turning the console over.
REMOVING THE MOTHERBOARD
The motherboard is attached on the top of the front panel (slide fader screws) and with screws on the bottom of the motherboard, requiring access to the inside of the console. When
replacing the motherboard, be certain to replace all of the screws so that switches and faders will operate properly.
ACCESSING THE INTERIOR OF THE VU METER PANEL
The VU meter panel is opened by removing the screw at the left and right front of the panel.
ACCESS SCREWS
Arrakis Systems inc.
Advertisement
