Subscribe to Our Youtube Channel
Related Manuals for Autocall 2004 Foundation Series
Summary of Contents for Autocall 2004 Foundation Series
- Page 1 2004 and 2008 Foundation Series Fire Alarm Control Unit City Circuit Card Installation Guide 579-1419AC Rev A *05791419ACA*...
- Page 2 This page is intentionally blank...
-
Page 3: Table Of Contents
Cautions, Warnings, and Regulatory Information..................3 Introduction..............................4 Inspecting the contents of shipment..............................4 Overview.................................5 City circuit card specifications................................5 Mounting the city circuit card........................7 Communications and power connection....................8 City card configuration..........................9 Configuring the city circuit card................................9 Setting P6.......................................9 Disconnect settings of the city circuit card............................9 Configuring the city circuit card for the A004-9101 FACU....................... - Page 4 This page is intentionally blank...
-
Page 5: Cautions, Warnings, And Regulatory Information
Product operation and reliability depend upon proper installation. DO NOT INSTALL ANY AUTOCALL™ PRODUCT THAT APPEARS DAMAGED Upon unpacking your Autocall product, inspect the contents of the carton for shipping damage. If damage is apparent, immediately file a claim with the carrier and notify an authorized Autocall product supplier. -
Page 6: Introduction
This following sections describe the installation procedure for the City Circuit Card with Disconnect Switch A004-9909. Inspecting the contents of shipment Upon unpacking your Autocall product, inspect the contents of the carton for shipping damage. If damage is apparent, immediately file a claim with the carrier and notify your local Autocall product supplier. -
Page 7: Overview
2004 and 2008 Foundation Series Fire Alarm Control Unit City Circuit Card Installation Guide 3 Overview The A004-9909 city circuit card is used to annunciate alarms and other urgent indications to remote facilities. When the A004-9101 or A008-9101 control unit goes into alarm, the city card circuits are activated, and annunciation immediately occurs at the remote facility. Reverse polarity modules or local energy modules, for reaching the Public Service Fire Communications Center, receive annunciations at the remote site. - Page 8 2004 and 2008 Foundation Series Fire Alarm Control Unit City Circuit Card Installation Guide Table 2: City circuit card specifications City circuit card specifications Current Standby current: 30mA Alarm current: 60mA City output voltage ± 24 V nominal, 20 to 32 VDC, fused at 3 A Environmental specifications Operating temperature 32°F to 120°F (0°C to 49°C)
-
Page 9: Mounting The City Circuit Card
2004 and 2008 Foundation Series Fire Alarm Control Unit City Circuit Card Installation Guide 4 Mounting the city circuit card To mount the city circuit card inside the cabinet, complete the following steps: Remove the AC power at the breaker from the control unit. Use the B-key to unlock the hinged door of the cabinet. -
Page 10: Communications And Power Connection
2004 and 2008 Foundation Series Fire Alarm Control Unit City Circuit Card Installation Guide 5 Communications and power connection The city circuit card comes with a power and communication harness. You can use this harness for interfacing the city circuit card with the A004-9101 or A008-9101 control unit. -
Page 11: City Card Configuration
2004 and 2008 Foundation Series Fire Alarm Control Unit City Circuit Card Installation Guide 6 City card configuration Configuring the city circuit card For the city circuit cards, use the information in Table 3 and Setting P6 to set the jumper positions for reverse polarity and local energy operations. -
Page 12: Field Wiring City Card Circuits
© 2022 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision and are subject to change without notice. Additional listings may be applicable, contact your local Autocall product supplier for the latest status. Listings and approvals under Tyco Fire &...
Need help?
Do you have a question about the 2004 Foundation Series and is the answer not in the manual?
Questions and answers