Advertisement
Quick Links
Misfit Shine 2
GETTING STARTED
WHAT'S INCLUDED
Š‹‡
‹–‡•• ƒ† Ž‡‡’ ‘‹–‘”
„ƒ––‡”› ’”‡ ‹•–ƒŽŽ‡†
’‘”– ƒ†
Žƒ•’
…–‹‘ Ž‹’
ƒ––‡”› ‘‘” ‘‘Ž
BATTERY
HOW TO REPLACE THE BATTERY IN SHINE 2
Shine 2 is powered by a 3 Volt CR2032 coin cell battery (included). Only replace the battery in the Shine 2 with a CR2032
battery type. It lasts about 4 to 6 months with normal use. We recommend using the same brand (or one with equivalent
quality), which should give you the estimated battery life.
Sync your Shine 2 to the Misfit App. In the app, tap "Devices" to see a list of your devices. Each device listed will display a
battery icon, indicating the estimated remaining battery power.
1. Twist open the shine 2 body using the Battery Door Tool
Advertisement
Related Manuals for Misfit Shine 2
Summary of Contents for Misfit Shine 2
- Page 1 Sync your Shine 2 to the Misfit App. In the app, tap “Devices” to see a list of your devices. Each device listed will display a battery icon, indicating the estimated remaining battery power.
- Page 2 Place Shine 2 in your palm with the back facing up towards you. Connect the Battery Door Tool to the back, battery door, of the Shine 2. Press down firmly and rotate the Battery Door Tool to the left. If you do not have a Battery Door Tool, please refer to the section below “How to Open Shine 2 Without a Battery Door Tool”.
- Page 3 5. Place the battery door back onto the Shine 2 Place Shine 2 in your palm and put the battery door onto the back of the Shine 2. Make sure the indent above the Misfit logo on the battery door aligns with the small silver screw inside the Shine 2.
- Page 4 Connect the Battery Door Tool to the back, battery door, of the Shine 2. Press down firmly and rotate the Battery Door Tool to the right until the battery door will not rotate anymore. The Shine 2 will vibrate when closed. If you do not have a Battery Door Tool, please refer to the section below “How to Close Shine 2 Without a Battery Door Tool”.
- Page 5 HOW TO CLOSE SHINE 2 WITHOUT A BATTERY DOOR TOOL Place Shine 2 in your palm and put the battery door onto the back of the Shine 2. Make sure the indent above the Misfit logo on the battery door aligns with the small silver screw inside the Shine 2. Place your other palm over the back of the Shine 2, making good contact with both sides of the Shine 2.
- Page 6 2. Linking your Shine 2 for the first-time You will be prompted to link Shine 2 for the first-time. In the app, initiate the linking process to allow the device to search for the Shine 2’s Bluetooth signal. When linking begins, the LED lights on the Shine 2 should light up.
- Page 7 4. Linking your Shine 2 for the first-time You will be prompted to link Shine 2 for the first-time. In the app, initiate the linking process to allow the device to search for the Shine 2’s Bluetooth signal. When linking begins, the LED lights on the Shine 2 should light up.