Download Print this page

Charging The Headset - PowerLocus P2 Kids Princess User Manual

Advertisement

6. CHARGING THE HEADSET

• Insert USB charging cable into USB port which
have support 5V power (such as AC/DC USB
adapter or PC USB port). When the red light is
on, the headset is in charging. When the red light
will be off, the headset is fully charged. It takes
about 2-2.5 hours to charge the headset fully.
• The battery is rechargeable.Low-Voltage
alert:When the alert tone 'low battery' sounds
and the indicator turns into red indicate that the
battery has run out,need to be charged as soon
as possible.First time charging : please be sure
the battery has been charged fully before use.
7. WIRED HEADPHONE FUNCTION
For any mode of headphone,you can connect one
side of 3.5 stereo sound supply extension line to
headphone audio jack,the another side connect to
Audio jack(such as mobile phone,computer,Ipad
etc).Then you will hear songs from other devices.
8. Switch Mode – 85dB / 94dB
In order to change the volume sensitivity hold +
and – button at the same time till you hear the voice
prompt "85dB" or "94dB"
9. HOW TO RESET THE
HEADPHONES?
Hold both Buttons for 4-7 seconds in
order to reset the bluetooth and enter
pairing regime again.
.
4

Advertisement

loading
Need help?

Need help?

Do you have a question about the P2 Kids Princess and is the answer not in the manual?

This manual is also suitable for:

P2