Using A Sampled Sound In A Rhythm (Voice Percussion; Starting A Sampling Operation Manually; Deleting Sampled Data - Casio CTK-2090 User Manual

Using a Sampled Sound in a
Rhythm (VOICE PERCUSSION)
Use the following procedure to replace a percussive
instrument with a sampled sound you sampled with short
sampling and play auto accompaniment rhythms (page
EN-27) with it.
1. cl
Each press of (VOICE PERCUSSION) button
toggles between the VOICE PERCUSSION mode
and the normal rhythm mode.
• The VOICE PERCUSSION indicator will be on the
display while the VOICE PERCUSSION mode is
selected.
Lights
2.
Start rhythm play (page EN-27).
• Some rhythm part sounds are replaced by sampled
sounds you sampled with short sampling.
• In the VOICE PERCUSSION mode, the rhythm
accompaniment volume level is balanced with the volume
of the sampled sound. Because of this, the rhythm
accompaniment (chords and obbligato) volume level will be
lowered automatically.
Starting a Sampling Operation
Manually
1. 3
Press (FUNCTION) a number of times until
"SampAuto" appears on the display (page
EN-4).
S a m p A u t o
2. bp
Press (10-key) [–] key to select the OFF
setting.
This enables manual sampling. When this setting is
selected, sampling starts as soon as you release
step 2 under "Long Sampling" (page EN-11) or step 2
under "Short Sampling" (page EN-12).
• When the above setting is "oFF", sampling starts when
cq
you release , not when you press it. Sampling will
not start if you keep cq
Sampling a Sound and Playing it on the Keyboard (Sampling)
cq
depressed.

Deleting Sampled Data

To delete all sampled data
1. 1
Press to turn off power.
2.
While holding down
(10-key) [0] button, press
on again.
• Make sure the digital keyboard is not connected to a
computer when performing the above steps. Otherwise,
data may not be deleted correctly.
To delete the long sample
1. Press bo (SONG BANK).
2.
Hold down
• This will cause the confirmation message "Sure?" to
appear.
3. bp
Press (10-key) [YES] key to delete the data
or bp (10-key) [NO] key to cancel.
To delete the data for a specific short sample
number
1.
Press bn (RHYTHM).
2.
Hold down the SAMPLED TONES/EFFECTS
bq
button (
delete.
• This will cause the confirmation message "Sure?" to
appear.
3.
Press bp (10-key) [YES] key to delete the data
or bp (10-key) [NO] key to cancel.
in
bo
(SONG BANK) and
1 to turn power back
bq
(SAMPLED TONES/EFFECTS 1).
ck
to ) whose data you want to
bp
EN-15