Table of Contents
Advertisement
Available languages
Available languages
Installation
3
• It is important to follow the instructions in this manual before
starting work.
• The illustrations shown are examples and may differ from the
actual product (e.g. positions of the components).
3.1
Configuration of the module
1. Remove the module from the packaging.
2. Remove the upper half of the module enclosure (clamp fastening).
Side view:
3. Remove the screws of the cable gland and take out the cable gland completely.
Aerial view
TYKUP-08-A-IA-def-2311
INFORMATION
3
Advertisement
Chapters
Table of Contents
