Lenovo 3000 Q100 User Manual page 97

Hide thumbs Also See for 3000 Q100:
Table of Contents

Advertisement

—— External graphics card connector: Used to output monitor signals (VGA signals) through the
signal cable connected with the monitor. If the graphics card is equipped with S-Video connector and
cabled to a TV, pictures displayed on the monitor screen may be redirected to the TV (some models
are equipped with external graphics card).
—— TV antenna connector: Used to connect TV antenna (some models with TV card are equipped
with this connector)
7.1 Audio ———7.1 Audio connector: Refer to the following 7.1 audio settings
1.2.1 7.1 Audio Settings (Windows XP only)
You may connect the audio card to 7.1 speaker if the card supports 7.1 audio output. The I/O connectors for
7.1 Audio are described as below:
Set as below:
6
Lenovo 3000Q User Guide
Six I/O connectors, they are Line In, Mic
In, Line Out, Rear Speaker Out, Center/
Subwoofer Speaker Out, Side Speaker
Out respectively.
7.1 Audio connectors
Step 1
Right-click the audio settings icon located in
the lower right corner of your desktop.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

30141du - ideacentre q100 mini pcQ1003000q

Table of Contents