Lenovo 3000 K100 User Manual page 21

instant backup.
Recover Base Backup — Recover the data of system partition (drive C) which exists at the time
of "creating base backup".
Disable Instant Backup and Recovery — After the Instant Backup and Recovery function is
disabled, all Instant Backup and Base Backup data will be deleted. Make sure you do not require
such data before disabling that function.
Update Base Backup — Use the system partition (drive C) data in the latest state as Base
Backup to overwrite the old Base Backup data. The old Base Backup data will be lost. Make sure
that you do not need the old Base Backup data any longer before that operation.
Instant Recovery and Instant Backup are the same as the functions under LEOS.
Note:
1. Before performing the Instant Recovery and Instant Backup under LEOS, execute "Create
Base Backup" under Windows first.
2. In order to prevent failure of the recovery operation, do not change the size of drive C after
the backup operation.
3. Make sure to disable the Instant Backup and Recovery function or uninstall the "OneKey
Recovery" function before reinstalling the operating system. Otherwise, the operating
system cannot be reinstalled.
4. Before performing defragment of the operating system or the system maintenance functions
such as error detection or backup, disable the Instant Backup and Recovery function first.
Otherwise, the running of such software will be disabled or affected.
5. Precondition of updating base backup:
1) After the system software or system state changes sharply, if you confirm such change
and do not require the system to recover the state existent before the change, you can
perform the update of Base Backup which serves as base data of future instant backup.
You can also free up the hard disk drive space excessively occupied by the base backup.
2) When the system disk space is less than 1G, the OneKey Recovery function will prompt
you to perform disk cleanup and update base backup.
6. The "OneKey Recovery" function will run automatically on the background with the startup
of the Windows. Certain antivirus software may regard such automatically running process
as risk and warn the user. In such circumstances, choose to allow the software to go on
automatically, whereupon the antivirus software will not give such prompt any longer.
31031422 Greenland UG_EN.indd 17
17
Lenovo 3000K User Guide
2007.8.20 4:58:18 PM